Delicacy Management Improve Magnesium Oxide Manufacturer Quality

   The internal management is very important to promote the transformation and upgrading of magnesium oxide manufacturers. For example, the Meishen Technology’s internal delicacy management. It is famous in the industry. Meishen’s elicacy management is always strong, especially the magnesium oxide production base. The management level is outstanding at home and abroad.

   Meishen Technology can obtain achievement in the delicacy management, there are several aspects:

   One is production and operation management. The equipment in magnesium oxide base adopt high standardized construction and implement high level management. And the staffs are very keen-witted and capable. It is unprecedented in China. At the same time, in order to assure equipment is safe, effective and can operate with long period, Meishen provides effective system to guarantee the high-efficiency operation of magnesium oxide suppliers and manufacturers. Continuous operation can not only save energy and reduce cost but also save cost furthest.

   Two is system improvement and optimizing. In terms of the technology. As for the aspect of technology, magnesium oxide equipment has not appeared fundamental changes in the world in these years. However, with the advent of intelligent control and other technologies, it still has more room for improvement. Through optimizing the intelligent control technique, it can save energy about 10%. What’s more, Meishen make a lot of efforts in this aspect, and has achieved good results.

   Three is to carry out the risk control with effect. Two aspects decide the fate of a manufacturer: first is safety production; second is internal controls. The dominant ideas of Meishen Technology is: the safety is the most important than others. All works must be operate in the premise of safety. Meishen pays more attention to the safety, and provides a serious of safety management measures. Therefore, It is a pioneer in the domestic magnesium oxide industry.

China Becomes the Top Magnesium Salt Producing Country

   During the “Twelfth Five-year Plan” period, Chinese magnesium oxide industry shows booming trend. In recent years, with the great development of domestic industry, the output of magnesium oxide has been rising a lot. During the “Twelfth Five-year Plan” period, the annual growth rate of magnesium oxide capacity stays more than 20 percent. It stays well above the global average. After another development of five year programming, China will be the top magnesium salt producing country.

   According to the statistics from magnesium oxide special committee, there are more than thousands of magnesium oxide manufacturers and suppliers in China. For the more than 100 typical large magnesium oxide enterprises, the magnesium oxide association made a statistic: there is a few magnesium oxide manufacturer which can over ten thousand tons in annual output. The full production capacity of magnesium oxide suppliers and manufacturers that leaded by Meishen Technology is nearly 50 percent. There are more than 20 manufacturers to output magnesium oxide from 3000 tons to 8000 tons, it occupies 30 percent of total output. There are more than 40 manufacturers to output magnesium oxide between 1000 tons and 2800 tons. It occupiese 10 percent of the total output. In addition, there are more than 30 manufacturers to output magnesium oxide only 40000 tons. It is less than 5 percent of the total output.  

   A few years ago, the domestic magnesium oxide existed a certain gap with the foreign magnesium oxide. It mainly manifest in single variety and weak strengthen in researching and developing new products. Therefore, most of products only competed disorderly in the low-end. In replying the international environmental protection law and regulation, it is passive. However, during the 13th Five Year Plan, on the one hand, the magnesium oxide industry should strengthen competitiveness in the technical procedure. On the other hand, it should strengthen communication with upstream raw material industries. Therefore, they can reply the requirements of international environmental directive and ecological safety standard together, take them out of large but not strong, meet the needs of prospective market.

   According to information, because the huge potential market of Chinese magnesium oxide products, a lot of transnational magnesium oxide manufacturers build factories in Qing hai, Guang dong and other provinces in the shape of sole proprietorship or joint venture. Therefore, Chinese magnesium oxide suppliers and manufacturers need to make the transition and upgrade urgently, and pay more attention to the high end magnesium oxide products. I believe it's not too far to grasp the market of high end magnesium oxide. 

How to Form Magnesium Oxide From Magnesium Carbonate?

   If you had learned chemistry, you know that the magnesium oxide can be generated from magnesium carbonate under high temperature. However, maybe you do not know how to form magnesium oxide from magnesium oxide, and what is the temperature to form it? Now, the expert from Meishen Technology explains in detail for you.

   The magnesium carbonate can be pyrolyse directly and produce magnesium oxide and carbon dioxide. It is the the most direct way. However, it need hot environment. The decomposition temperature of magnesium carbonate is 540℃. When the temperature reaches 790℃, the magnesium carbonate can be break up into magnesium oxide and carbon dioxide. The temperature is higher, the content of magnesium oxide is higher.

   In the magnesium carbonate, 47.6 percent of magnesium carbonate content is a theoretical value. It is right. The content of premium grade magnesium carbonate is between 46% to 47%. However, generally speaking, the magnesium carbonate produced by industrialization is basic magnesium carbonate. The national standard stipulates that the content should between 40% to 44%.

   Now, the expert tell you another method. You can judge the magnesium oxide from whether the magnesium oxide or the magnesium hydroxide. And then, how to judge it?

   After resolving magnesium carbonate, the magnesium oxide has more pore. It means that it has a small density. So you can only measure the bulk density.

   Meishen Technology is a national high and new technology magnesium oxide manufacturer and national torch program project demonstration supplier. It is the magnesium oxide engineering technology center and innovative pilot enterprises in Hebei Province. The high-end magnesium oxide project of Meishen Technology walks a development road of relying of domestic, independence and self-reliance. It is different from the product of the other high-end magnesium oxide. The high-end magnesium oxide production project of Meishen Technology adopts the new fashioned technology and a reasonable project process. Due to the advanced magnesium oxide technology, it obtained a number of national patents. So it has own intellectual property rights. In the application fields, it can replace completely imported high-grades magnesium oxide and satisfies various requirements from customer group.    

How to Keep Energetic in Magnesium Oxide Market?

   At present, the government pays more attention to the basic chemical industry. As a magnesium oxide manufacturer and supplier, Meishen Technology grasps this opportunity, keeps pace with the times, and insists the magnesium oxide development idea of “I have no one, I have the best, I have particular”. Implementing products difference strategic and fully exploiting market segment, Meishen Technology also further adjusts the structure of the product and optimize product. Therefore, the magnesium oxide can continues to maintain fresh vitality, and meet the market requirement at home and abroad.

   In order to meet the requirements of high-end field, improve market competitiveness of domestic magnesium oxide and enlarge the market share, Meishen Technology has developed high and mid grade magnesium oxide. In its early stage, Meishen just had more than 20 kinds of products. At present, it has more than 300 kinds of products. Sunwen, the president of Meishen Technology said, “Some kinds of magnesium oxide has structural advantage. The ordinary magnesium oxide can not replace it completely, such as the high pure magnesium oxide, nano magnesium oxide, etc.”

   In the future, the development of magnesium oxide must establish a brand image and actualize famous brand strategy. In order to realize product transformation and upgrading, it should insist to produce with the refine preparation concept. Under the background of the increasingly fine ratio of magnesium oxide, through refining market and intensive cultivation, it also can make the product to adapt the specific operating requirement, and achieve the aim of based on the market.

   At present, the magnesium oxide industry has a low efficiency. There are two primary causes: excess production capacity and product homogeneity. This difficult environment leads to anti-driving mechanism. As thus, a lot of enterprises in magnesium oxide industry has a more conscious version and a stronger aspiration to speed up the transformation and upgrading. Therefore, the magnesium oxide industry is in the critical period of transformation and upgrading. In the future, it will be the key of development in magnesium oxide industry to take the new road of high-end magnesium oxide, continually enhance the advantage of competition and the sustainable development capacity. What’s more, this industry should cultivate a group of demonstration enterprise to adjust structure and upgrade. In order to promote the development of the whole industry, these magnesium oxide manufacturers and suppliers should play a guiding role.  

Create Meishen to be a Famous Brand

   After 20 years of development, Meishen Technology abstracts the advanced manufacturing technique at home and abroad. At present, in the aspects of production process equipment, control level, three wastes treatment and energy conservation, Meishen is in the leading domestic level. It's worth noting that the energy efficiency management is forging ahead steadily. Therefore, it is anticipated that Meishen Technology will entirely realize the annual energy saving target. So, revolving around the energy saving and cost reducing, what are the brilliant ideas from Meishen? And how it achieve the goal of energy saving?

   Facing the fierce market competition, in order to seek a greater market space, Meishen introduces various of high end magnesium oxide technology from overseas at present. What’s more, it has already succeeded in research and develop the nano magnesium oxide, high pure magnesium oxide and so on. At the same time, Meitai Magnesium Material, the subsidiary corporation of Meishen has already succeed in reaearching, developing and producing the silicon steel grade magnesium oxide in 2014. This silicon steel grade magnesium oxide has stable quality, and many indexes are superior to the same products at home and abroad. These indexes include grain size, crystal structure, hydration rate, activity degree, viscosity and so on.
   Meishen is always seeking the latest magnesium oxide process engineering actively, and expanding upstream and downstream industry chain. The customers’ requirements oriented, it pursues the best quality magnesium oxide, provides the excellent after sales service and continuous to improve quality of products. Working hard for create “Meishen” as a global brand name.

   At present, Meishen Technology has a group of high level management personnel and marketing team with perfect service. What’s more, it builds up long term and stable relationship with many well-know domestic and foreign famous customers. Meishen always adheres to “customer satisfaction as criterion” management idea. Because of the excellent magnesium oxide quality, high quality after sales service and fast guarantee of delivery, Meishen Technology wins more and more clients favor, and bears high reputation in the industry.

Applications of High Purity Magnesium Oxide

   We know that the magnesium oxide has widely applications in industry. Although the dosage is not much in the usual, the magnesium oxide just like the salt when you cook. It would tasteless if lacks the salt, and it is easy to fall ill. Therefore, the magnesium oxide plays an important role in industry. A large number of purchasers know that there are different kinds of magnesium oxide, such as light magnesium oxide, active magnesium oxide, etc. However, how to subdivide the light magnesium oxide? For example, high purity light magnesium oxide. Have you ever heard of it? Now, let us talk about the applications of high purity magnesium oxide.

   The light high purity magnesium oxide is a kind of light magnesium oxide which has high purity even to 99%. It has a better performance than the general light magnesium oxide a lot. Light high purity magnesium oxide is a kind of white loose unformed powder which is odorless, tasteless and nontoxic. The volume of light magnesium oxide is is three times as large for heavy magnesium oxide.

   The light high purity magnesium oxide price is higher than the general. Therefore, it is usually used in a high level field, for example, medicine, food, etc. Of course, it can be used for metallurgy, smelting, advanced magnesite brick and making refractory matter and moisture preservation. What’s more, it is widely applied to rubber, rubber sheet, rubber goods, pharmaceuticals industry, food industry,plastic sheet accelerant, glass fiber reinforced plastics plasticizer, the coating of silicon steel sheet, the stopping and fortifier of paper, steel ball polishing paste, leather treating agent, insulation, grease, dye, ceramics, drying agent, resin, fire retardant, etc. In addition, it also can be used for the stopping and fortifier rubber and plastic goods, soft magnetic ferrite and tackifier. In the chemical industry, this light high purity magnesium oxide can be used as catalyst and make other magnesium compounds.

   At present, the magnesium oxide market is chaotic. Many illegal magnesium oxide manufacturers sell general light magnesium oxide as high purity light magnesium oxide. It will bring great loss to the customers. Therefore, you must choose a standard magnesium oxide manufacturer when you purchase it. Meishen Technology is the leading magnesium oxide supplier and manufacturer in China. It is a trustworthy manufacturer. Welcome to visit the company and discuss business. 

Simplify Mid-link for MgO Export

   Because unfamiliar with the exporting countries and lower brand awareness, at present, the Chinese magnesium oxide suppliers and manufacturers usually to seek the foreign agencies. Although this method can make the magnesium oxide export smooth in short order, over the long run, the Chinese magnesium oxide enterprises will never go abroad. What’s more, the market resource is mastered by these agencies, it means that a large number of corporate profit is consumed by the middle links. Once two sides appears unpleasant situation, the enterprise will suffer fatally damage.  

   In this aspect, Chinese magnesium oxide suppliers and manufacturers can take example by Meishen Technology. Meishen is a magnesium oxide manufacturer which has a good rank all over the world. It pays more attention to the export business, at the same time, it actively operates transnational business. For the detail, it enters the target markets with the form of joint venture cooperation. As thus, the market expansion is rapid exceptionally.

   Looking back the history towards the world, it is not hard to found that the biggest obstacle of Chinese magnesium oxide industry is the talent. On the one hand, it is lack of inter-disciplinary talent which know about the technology, management and good at the foreign languages. It leads to various of stumbling blocks in the process of the foreign trade and transnational operation. On the other hand, these magnesium oxide manufacturers and suppliers know little about the “rules of the game” of international market. Therefore, in order to gather information about the laws, regulations and market operation, we suggest that it should establishing foreign offices beyond seas. Building good relations with the local government, it can lay the foundation of developing market further. However, it is a few enterprises to adopt or willing to do it.  

   At present, it should actively cultivate inter-disciplinary talent which can meet the demand of the market competition, pay more attention to the external exchange, and gain advanced experience from magnesium oxide powerful nation state. The government should offer support and macroscopic guidance to magnesium oxide manufacturers and suppliers, provide a good policy and legal system environment for the export-oriented development. With the help of enterprises, government, scientific research institutions and social organizations, Chinese magnesium oxide industry will better and better.