Magnesia Industry Create New High in 2017

   With the increasingly strict environmental protection law and regulations, each magnesium oxide manufacture is limited little by little. Whether the magnesium oxide industry can really solve environmental issue and realize cleaner production or not? It is the key to realize sustainable development for magnesium oxide suppliers and manufacturers.

   At present, for the three wastes, the technology is not a big problem. The major problem is cost. Looking at the raw material and technological route of domestic magnesium oxide industry, many magnesium oxide suppliers and manufacturer invest a lot into it, but gain the payback a little. According to the different scale, raw material and technology, it is a big financial responsibility for some enterprises. In order to solve problem, it should change the route of loe end raw material.

   In order to promote magnesium oxide industry’s sustainable and healthy development, there are some suggestions: one is to strengthen the guiding function between related departments and industry associations, enhance the research for the advanced technology. Two is pay more attention to support the leading magnesium oxide manufacturer, cultivate the large scale enterprise with international competitiveness through alliance and reorganization.

MgO for Rubber and MgO for Glass Fiber Reinforced Plastic

   Activity is an important indicators to measure the quality of magnesium oxide for rubber industry. In the rubber production, reactive magnesium oxide as one of the important inorganic activator, only add a small amount can greatly improve the degree of vulcanization.

   Due to the driving force of domestic and foreign two markets in China, glass fiber reinforced plastic industry has got rapid development. Meanwhile, its downstream of the magnesium oxide industry, also going into a high-speed development period. But many magnesium oxide manufacturers said, researching and developing of high-end magnesium oxide environmental protection material have broad prospects.

   You have to know, magnesium oxide, the same with zinc oxide are playing the role of liquidity and antioxidant ability, optimizing the tensile strength and impact resistance of the rubber. So they are the important compounds of halogenated rubber. In CR, magnesium oxide and zinc oxide mix as a curing agent, then magnesium oxide can reduce the activity of zinc oxide, to have the effect on slow down the vulcanization rate, in order to avoid crosslinking problems in the early time. Meanwhile, magnesium oxide can also have the effect of acid acceptor, to prevent the charred and cyclization. Secondly, the activity of magnesium oxide, that is iodine adsorption value, have a big influence on scorch resistance performance, tensility, tensile strength and hardness.

   In addition, light magnesium oxide is also the frequently-used kind in rubber production. Most of the time, it plays the same role with reactive magnesium oxide. In conclusion, magnesium oxide plays an important role in rubber industry.

   It is important for magnesium oxide to being used in glass fiber reinforced plastic production, such as the roles of thickener and increase the FRP brightness. So, compared with same type, the glass fiber reinforced plastic added magnesium oxide are welcomed by the markets. What is worth mentioning, not all types of magnesium oxide can be added to the glass fiber reinforced plastic, only special magnesium oxide can reach the ideal effect. MEISHEN magnesium oxide supplier can custom-made specifications by different customers requirements. In general case, we need to adjust the activity of magnesium oxide according to the change of climate. As for magnesium oxide for glass fiber reinforced plastic, it is better to choose active magnesium oxide, even more, it is better to choose higher activity of magnesium oxide for winter, and choose low activity magnesium oxide for summer.

The Outlook About Chinese Magnesium-based Products

   We should make good use of resource to develop high-grade and functionalized magnesium oxide with high fining degree. At the same time, it should pay attention to develop the combination of high and low end products. The different grade should be made to a series of products, for example, type serialization, function serialization, specialization and so on. Especially the reactive magnesium oxide, magnesium hydroxide, magnesium oxide for cable and electric wire, and other magnesium salt products.

   These products’ applications are exploiting continually. Therefore, in order to open up overseas markets, magnesium oxide manufacturers should strengthen the research and the development of these magnesium oxide, produce according to the international standards strictly. However, we also should combine the production and research. During the research, you also should consider it through combining the industrialization and entironment. For example, reducing energy consumption. It can improve the efficiency of resources usage. Trying to achieve circular using of resource and sustainable development.

Test the Magnesium Oxide Content

   As a professional magnesium oxide manufacturer, Meishen Technology will introduce the procedures in magnesium oxide content Test.

   Magnesium oxide legitimate water test

   Theoretical basis: Only active magnesium oxide can be reacted with boiling water.

   Steps: Accurately weigh 100 grams of magnesium oxide into a constant weight dry beaker, water was added to 400g, so that it is completely wet. Then heating boiling 2 hours on the furnace(Experiments have proved that, at 100 degrees C, two hours of hydration reaction to become fully), at last, take out and drying to constant weight of up to 150 degrees Celsius.

   Calculation method: Magnesium oxide content is calculated according to the following formula. The activity of magnesium oxide content = (A – 100) / 45 x 100%. 100 is sample quality before hydration, A is the sample quality after hydration, 45 is a conversion factor.

   Explanation: A lot of information is put forward to boil for 45 minutes. Stop the heating time is based on: Turn off electric power, the slurry quickly stop boiling. Because the reaction of magnesium oxide with water is an exothermic reaction, before the reaction is not over, if you stop the heating, the reaction heat will continue to maintain the slurry boiling for some time.

Through a large number of trials, general boil 2 hours response tends to completely. Issues that need attention: the heating process, to avoid spilling a beaker of slurry; drying time is as long as possible to ensure complete evaporation of moisture.

   What’s more, Meishen has Export license. If you want to have the business on magnesium oxide import and export, please choose a formal magnesium oxide supplier and manufacturer, that is to say, it should have complete export licenses.Export license (Export Licence), refers to the Ministry of Commerce authorizes the issuing authority for the implementation of the law to limit the number or granted the export license restrictions of other export goods issued. Only a few larger enterprises can apply for in China, Meishen is one of them. Meishen mainly engaged in magnesium oxide production and sales of chemical raw materials and other products, since set up for more than 20 years, depend on high-quality products, reasonable prices, flexible marketing means, perfect after-sales service, won the trust of our customers. 

Creating Top Magnesium Oxide Base

As an superior magnesium oxide manufacturer and supplier, Meishen Technology locates in high and new technology industrial development zone of Xingtai City and depends on the rich resource of Tai-hang Mountains. These are incomparable advantages to develop magnesium oxide industry. It makes Meishen become the top and largest magnesium oxide production base in China. After research development and production for years, at present, it has already researched nearly hundred kinds of special magnesium oxide. Therefore, Meishen is enough to meet the demands of customers. For the special formula, Meishen Technology also can customized magnesium oxide for customers. It enjoys high reputation among customers from all over the world.

In the production workshop of Meishen Technology, we can see that the advanced automatic continuous production line in this professional magnesium oxide supplier. After more than 10 processes, it becomes new type magnesium oxide material with characters of waterproof, fireproof, abrasion resistant, poisonless and tasteless, going green and environmental protection. Depending on the science and technology input, the added value of magnesium oxide products increased by more than ten times. It really achieves the strategic planning with pollution free development, and establishes the foundation for creating the top magnesium oxide production base in the world.

View the Problem of Magnesium Oxide Industry in Future

   In recent years, magnesium oxide had became the main force of new type chemical market. From the market point of view, there is no doubt that the civilian price is good for customers and it brings trouble for the magnesium oxide manufacturers. If reduce the market price, compress the cost of production blindly, not only makes hard to ensure the quality of magnesium oxide, but also aggravate the contradiction between production and sales market.

   The future of magnesium oxide industry. In the time of internet+, what it can bring to magnesium oxide industry ? One is the newest model of magnesium oxide supplier and manufacturer. Under the guidance of national supply and reform, we can through the Internet to realize custom-made magnesium oxide specifications, to reduce the inventory of the enterprise, at the same time to meet consumer demand effectively. Two is the newest marketing mode. On the one hand, through online connection, and more targeted entire network marketing to set up the enterprise brand. On the other hand, through word of mouth marketing, fans and other low-cost marketing activities for the enterprise to bring more customers.

   The shape of the magnesium oxide price is in line with the law of development. With the increasingly fierce market competition, the price of magnesium oxide are slowly dipped to a reasonable range. Although it is true that the market price decline create constant pressure to the enterprise, but as the market acceptance, magnesium oxide sales is gradually rise, as a whole, enterprise economic benefits did not decline. Meanwhile, at the time of doing magnesium oxide industry larger and better, to reduce the intermediate link and the circulation cost are also the marketing model in market development.

   The obstacles of magnesium oxide industry. The cost of the magnesium oxide industry are mainly concentrated in three aspects. One is the cost of raw materials, with the shortage of global resources and the increased significantly raw materials prices, it is necessary for magnesium oxide to increase the cost. The second is the employee’s labor costs. With the human costs of the whole society, the production costs of magnesium oxide industry have also increased, due to the rely on ordinary stuff and talents.